Replacement sensor and cable
The best point of contact to obtain a replacement Water Witch sensor is a service technician or your place of purchase. Speak to your local pool service provider or retail store to purchase a new component.
Warranty
If your Water Witch is under 12 months old, you may be covered under the factory warranty.
See warranty claims.
Steps
- Unplug the sensor cable from the control box.
- Take off the end cap and remove the sensor from the balance line.
- Check the balance line for any debris. See Checking a balance line.
- Attach the new sensor cable to the control box.
- Ensure the sensor is set to the correct height. See Set sensor level.
TIP: Alternatively, you may use the old cable as reference when adjusting the sensor height to save time on step #5. Lay the cables next to each other and move the end cap on the new component to be at the same position as your old sensor.